Hi, I've been getting an error using the Frame Dumping option. Whenever starting a game or input file, I get an error "AVIDump Start failed". I have done this a few times on my main PC, but I am having issues when trying to do this on a laptop (Dell Studio 1558). I'm running a fresh install of Windows 8.1 fully updated. I've tried this on Dolphin 5.0-4296 and 5.0-3406 (I'm positive I've dumped frames on a version more recent than this on my main PC), and I've tried both lossless and lossy dumping. Are there any prerequisites that I need to install to get this to work? Thanks in advance!
↧
Help with dumping frames
↧
Movement issue in Summoner
So I go towards the screen I run fine. Left or right I walk. Start trying to move away from the screen I start jittering like my character is having a seizure. I am using a PS3 controller.
Edit: anything less than 100 radius in the control settings using a controller will cause this to happen. However the game freezes immediately upon being attacked by the ghosts on the island. Any fixes would be appreciated.
Edit: anything less than 100 radius in the control settings using a controller will cause this to happen. However the game freezes immediately upon being attacked by the ghosts on the island. Any fixes would be appreciated.
↧
↧
Can the Mi notebook air 13.3 run dolphin 5.0 in 1080p?
Hi!
I have been thinking about buy the Xiaomi Notebook air 13.3 but I wanna run gamecube/wii games on it!
The thing is, I do not know if the laptop has enough power to run games in 1080p and 30fps in mostly of games.
Here is the specs
Processor Intel ® Core ™ i5
Graphics card NVIDIA GeForce 940MX
RAM 8GB RAM
Can I run games on it?
I have been thinking about buy the Xiaomi Notebook air 13.3 but I wanna run gamecube/wii games on it!
The thing is, I do not know if the laptop has enough power to run games in 1080p and 30fps in mostly of games.
Here is the specs
Processor Intel ® Core ™ i5
Graphics card NVIDIA GeForce 940MX
RAM 8GB RAM
Can I run games on it?
↧
Help with keyboard controls for gamecube
Hello.
I am having trouble with keyboard controls for gamecube, I don't even really know much about gamecube controls, sorry but I am new to this.
So basically it is telling me memory card in slot a is corrupted and needs to be formatted.
I don't know how to go up or down between options or select options.
I have tried every key and I have set the options to keyboard so I do not know what to do.
It would be awesome if you could help,
~MountainDew :3
I am having trouble with keyboard controls for gamecube, I don't even really know much about gamecube controls, sorry but I am new to this.
So basically it is telling me memory card in slot a is corrupted and needs to be formatted.
I don't know how to go up or down between options or select options.
I have tried every key and I have set the options to keyboard so I do not know what to do.
It would be awesome if you could help,
~MountainDew :3
↧
Edrums.. is there any way??
hello guys sorry if this is already answered i have a Roland Edrum so is there any way to connect those drums to play rock band 3 on dolphin??. THANKS
↧
↧
Game crash on save
Hello, I am trying to play a Rune factory final frontier.
I've played this game before without problems on older versions of Dolphin.
Not sure what the issue is now but when the game loads., after clicking on "New game", it will go to a save screen to create a new file and there it freezes. Dolphin becomes unresponsive after this.
Solutions?
Tnx for your time!
I've played this game before without problems on older versions of Dolphin.
Not sure what the issue is now but when the game loads., after clicking on "New game", it will go to a save screen to create a new file and there it freezes. Dolphin becomes unresponsive after this.
Solutions?
Tnx for your time!
↧
game slowdown
Ok I have a kind of annoying problem here in Super Mario Galaxy.
First of all, is this the right place to post this?
Second, here's the problem: you guys already know that you need "Skip EFB access from CPU" unticked to properly shoot the starbits in Mario Galaxy, and it works, but when I disable it my game slows down a bit, in the HUB I'm having 40-50 fps but in the rest of the game it's often 60 fps (and cpu override doesn't work in this game apparently), but this is an hardware problem and we can't do very much. The real problem is that when I untick that and I look at that sort of sun in the horizon (shown in picture) the game slow down A LOT, at the point of being unplayable, around 20-30 fps, even in the HUB. But... why? This doesn't happen when I have that option ticked. Do you know a patch for this?
![.png]( "PNG Image")
RMGE01-1.png (Size: 379.96 KB / Downloads: 0)
First of all, is this the right place to post this?
Second, here's the problem: you guys already know that you need "Skip EFB access from CPU" unticked to properly shoot the starbits in Mario Galaxy, and it works, but when I disable it my game slows down a bit, in the HUB I'm having 40-50 fps but in the rest of the game it's often 60 fps (and cpu override doesn't work in this game apparently), but this is an hardware problem and we can't do very much. The real problem is that when I untick that and I look at that sort of sun in the horizon (shown in picture) the game slow down A LOT, at the point of being unplayable, around 20-30 fps, even in the HUB. But... why? This doesn't happen when I have that option ticked. Do you know a patch for this?
RMGE01-1.png (Size: 379.96 KB / Downloads: 0)
↧
Strange issue with C Stick cross Analog
I ordered a gamecube usb controller off of amazon and am having a strange issue. There seems to be a tie between the analog and c stick, that is, when I move one in a certain direction the Dolphin controller configuration shows the red dots on the other moving. I will attach pics below showing what happens. I looked up the issue and it seems other people have c stick problems but not like this one.
As an aside, the controller came with a small disc that people seem to assume contains drivers - could this be the issue? I use a macbook air and so I cannot insert the disc without buying an external disc drive. The issues specifically looks like:
Up Analog: Works
Left Analog: Left C Stick
Up C Stick: Slight left analog and upper left c stick
Left C Stick: Nothing
Pics will be attached. Any help is much appreciated.
Up Analog
![.png]( "PNG Image")
Up analog.png (Size: 78.06 KB / Downloads: 1)
Left Analog
![.png]( "PNG Image")
Left analog.png (Size: 80.67 KB / Downloads: 2)
Up C Stick
![.png]( "PNG Image")
Up C Stick.png (Size: 81.41 KB / Downloads: 1)
Left C Stick
![.png]( "PNG Image")
Left c stick.png (Size: 78.85 KB / Downloads: 1)
As an aside, the controller came with a small disc that people seem to assume contains drivers - could this be the issue? I use a macbook air and so I cannot insert the disc without buying an external disc drive. The issues specifically looks like:
Up Analog: Works
Left Analog: Left C Stick
Up C Stick: Slight left analog and upper left c stick
Left C Stick: Nothing
Pics will be attached. Any help is much appreciated.
Up Analog
Up analog.png (Size: 78.06 KB / Downloads: 1)
Left Analog
Left analog.png (Size: 80.67 KB / Downloads: 2)
Up C Stick
Up C Stick.png (Size: 81.41 KB / Downloads: 1)
Left C Stick
Left c stick.png (Size: 78.85 KB / Downloads: 1)
↧
GPU Usage ??
Trying to make a few performance tweaks and I think I can get some thermal overhead if I underclock the GPU.
Will underclocking the GPU speed affect dolphin at all ?
If I underclock here then I should be able to overclock the CPU.
Will underclocking the GPU speed affect dolphin at all ?
If I underclock here then I should be able to overclock the CPU.
↧
↧
Having trouble downloading dolphin: This site can’t be reached dl.dolphin-emu.org to
I cant seem to download dolphin on any of my computers today. Chrome and edge keep timing out and saying
This site can’t be reached
dl.dolphin-emu.org took too long to respond.
I'm not sure if this is being caused by something on my end, but I tested multiple computers and cant seem to download the newest dolphin dev builds right now.
Sidenote: I can download texture packs and access the website just fine. This only happens when I attempt to download dolphins newest builds, I can also download 5.0 stable just fine just not the newest dev builds, even the older ones that were made a week ago.
Edit: I tested another network, and tried to download dolphin on my phone as well, and im still getting this error message
This site can’t be reached
dl.dolphin-emu.org took too long to respond.
I'm not sure if this is being caused by something on my end, but I tested multiple computers and cant seem to download the newest dolphin dev builds right now.
Sidenote: I can download texture packs and access the website just fine. This only happens when I attempt to download dolphins newest builds, I can also download 5.0 stable just fine just not the newest dev builds, even the older ones that were made a week ago.
Edit: I tested another network, and tried to download dolphin on my phone as well, and im still getting this error message
↧
Failed to Link Shaders Fatal Error
![[Image: BP8knTT.png]](http://imgur.com/BP8knTT.png)
I really have no clue as to what is happening. I am trying to open Super Mario Sunshine and Mario Kart Double Dash, both of which used to work fine but now dont work at all. Any help would be greatly appreciated. I am also running Windows 10. The entire Dolphin program then freezes after receiving this error.
↧
How to use gamecube controller on Wii games?
So I have and use the official WiiU gamecube controller adapter. For Gamecube Controllers, I have Port 1 set to "Gamecube Adapter for Wii U", and it works for Gamecube games. For Wiimote, however, all there is is None, Emulated Wiimote, Real Wiimote, and Hybrid Wiimote. And when I choose one of those that I can actually configure (Emulated or Hybrid) and try to choose the adapter under device the adapter is not there.
![.png]( "PNG Image")
Capture.PNG (Size: 74.74 KB / Downloads: 1)
![.png]( "PNG Image")
2.PNG (Size: 18.2 KB / Downloads: 2)
How do I make it so I can use the gamecube controller for Wii games, if possible?
Capture.PNG (Size: 74.74 KB / Downloads: 1)
2.PNG (Size: 18.2 KB / Downloads: 2)
How do I make it so I can use the gamecube controller for Wii games, if possible?
↧
cant connect controller
I can't connect a wiimote to my computer, I'm using a mac and it does connect to the computer but not dolphin
↧
↧
IOS
What IOS is recommended? ![Huh]( "Huh")
↧
Mayflash 4 Port Gamecube controller adapter Issue (2+ controllers) OSX
Hey everyone,
Ive recently purchased the Mayflash 4 controller gamecube adapter for the Dolphin Emulator. I've used both the SmashEnabler.kext and Wiiu-GCC one by Area to recognize the controllers. I can get Dolphin to recognize my controllers just fine... The issue I'm having is that I can't seem to have more than two plugged in at a time. Has anyone else come across this issue?
Cheers!
OSX Sierra
Dolphin 5
Mayflash 4 Controller Adapter
Ive recently purchased the Mayflash 4 controller gamecube adapter for the Dolphin Emulator. I've used both the SmashEnabler.kext and Wiiu-GCC one by Area to recognize the controllers. I can get Dolphin to recognize my controllers just fine... The issue I'm having is that I can't seem to have more than two plugged in at a time. Has anyone else come across this issue?
Cheers!
OSX Sierra
Dolphin 5
Mayflash 4 Controller Adapter
↧
Issues using dolphin's debugger
Currently I'm experiencing some weird behavior with dolphin's debugger. At this point I just wanna know if I'm doing something wrong or if the debugger is just buggy.
First I should say I've experienced some inaccuracies with the JIT Recompiler (exceptions triggered on instructions that can't possibly cause that type of exception (ex. an MR instruction causing an "invalid read from address" exception)) so I currently have it on the Interpreter for better accuracy.
The first example is something that has gotten annoying and I do think is an actual bug.
Without setting any breakpoints and triggering the bug in the Internet Channel a couple of exceptions are generated as expected and the game hangs however dolphin still functions just fine.
However, when setting a breakpoint and then triggering the bug the breakpoint is hit as expected but when I step then play to keep the game running dolphin simply hangs (not crashes just hangs) and I am forced to quit it from the terminal.
Is this just me miss using the debugger or is this a bug?
I realize I am being vague with what the actual bug is but I wrote it like because to trigger the bug requires me setting up some server somewhere so that people can reproduce the behavior and all I am trying to do is see if I'm using the debugger incorrectly.
Realized after posting that this should go under the Support area and not the Development area. If that is where it should be then can a mod move it over there?
My Specs:
OS: Arch Linux x86-64
Graphics: Intel Integrated Graphics
RAM: 8GB
CPU: Intel® Core i7-4790K CPU @ 4.00GHz
Dolphin-version: latest git (as of typing this) (4d0dd930981daa0638e3ed62dcb9ae5678af3fce)
First I should say I've experienced some inaccuracies with the JIT Recompiler (exceptions triggered on instructions that can't possibly cause that type of exception (ex. an MR instruction causing an "invalid read from address" exception)) so I currently have it on the Interpreter for better accuracy.
The first example is something that has gotten annoying and I do think is an actual bug.
Without setting any breakpoints and triggering the bug in the Internet Channel a couple of exceptions are generated as expected and the game hangs however dolphin still functions just fine.
However, when setting a breakpoint and then triggering the bug the breakpoint is hit as expected but when I step then play to keep the game running dolphin simply hangs (not crashes just hangs) and I am forced to quit it from the terminal.
Is this just me miss using the debugger or is this a bug?
I realize I am being vague with what the actual bug is but I wrote it like because to trigger the bug requires me setting up some server somewhere so that people can reproduce the behavior and all I am trying to do is see if I'm using the debugger incorrectly.
Realized after posting that this should go under the Support area and not the Development area. If that is where it should be then can a mod move it over there?
My Specs:
OS: Arch Linux x86-64
Graphics: Intel Integrated Graphics
RAM: 8GB
CPU: Intel® Core i7-4790K CPU @ 4.00GHz
Dolphin-version: latest git (as of typing this) (4d0dd930981daa0638e3ed62dcb9ae5678af3fce)
↧
Dolphin closes immediately after opening
I have tried both 5.0 stable and 5.0-4446. Whenever I try to open it, it immediately closes in less than a second. I have tried updating my graphics driver, downloading Visual C++ 2013 runtime, without any results. Any ideas on what's going wrong?
↧
↧
Ar code bugs
So I recently started animal crossing on GCN and wanted to use the Infinite Bells AR code to pay off my debt but when I started the game after activating the code the game resets! any help and fix?
↧
Dolphin freezes on grabbing WiiRD codes for MHT
Dolphin freezes when I try grabbing gecko codes from WiiRD. Don't know why. Had this issue on 4.0.
Current version: 5.0
Installed on my secondary 1.5TB RAID0 array
Let me know if I need to provide more information.
Current specs:
Intel Xeon E3 1240
GTX 1050ti FTW
GTX 950 FTW (yes, I have 2 different GPUs installed)
8GB Corsair XMS3
AsRock H77M
Sandisk SSD Plus 240GB
1.5TB RAID0 array (3x 500GB)
500GB RAID0 array (2x 250GB)
upHere 240mm AiO Liquid Cooling
Corsair CX600 v1
Thermaltake Dragonscale
Windows 7 SP1
Current version: 5.0
Installed on my secondary 1.5TB RAID0 array
Let me know if I need to provide more information.
Current specs:
Intel Xeon E3 1240
GTX 1050ti FTW
GTX 950 FTW (yes, I have 2 different GPUs installed)
8GB Corsair XMS3
AsRock H77M
Sandisk SSD Plus 240GB
1.5TB RAID0 array (3x 500GB)
500GB RAID0 array (2x 250GB)
upHere 240mm AiO Liquid Cooling
Corsair CX600 v1
Thermaltake Dragonscale
Windows 7 SP1
↧
Dolphin on the Lenovo Yoga Book
Hi everyone, it-s been a couple of months now that I-m trying to make the emulator work on my lenovo yoga book android version. This device have an intel processor and I think that is the problem which makes the emulator not running games in it. Does anyone know any alternative or solution to make it run games and make it work?
Thanks
(btw, sorry for my english)
Thanks
(btw, sorry for my english)
↧