Quantcast
Channel: Dolphin, the GameCube and Wii emulator - Forums - All Forums
Viewing all 26094 articles
Browse latest View live
↧

GC controller adapter not working

December 14, 2018, 6:22 pm
$
0
0
I followed the guide on the wiki in order to get the driver installed for the adapter but dolphin still reported it as not connected and I don’t know why. I am updated to a version that is supposed to support that but it just still does not work. I used zadig and installed the winusb driver with the adapter connector i’ve tried restarting dolphin and my pc but nothing works. I don’t know what else to put here so if you need more info just ask. Thanks Smile
↧
Search

Black screen Vulkan Android Pie

December 14, 2018, 7:02 pm
$
0
0
Hello, I know if have some thread about this topic, but I want just know, Why Android Pie with Vulkan 1.1.66 get black screen on every game ? I have PocoPhone F1 with stable miui 10 (Pie), I test other custom rom's, but none get vulkan works on dolphin. PPSSPP works very well ( I Know PPSSPP have different build and builder), but I need know where is the error Android 9 made for dolphin ?
↧
↧

Gamecube Wii U adapter, C-stick not working

December 14, 2018, 7:10 pm
$
0
0
So I downloaded dolphin over a year ago and never had this issue until I started using it again recently. Since of course, I am using the "Wii U Gamecube adapter" it appears that it is configured "automatically" and I am not given the option to adjust the settings as opposed to if I had the "Standard Controller" option. That creates a problem because whenever I have seen people on the internet having the issue of their C-stick not working, they always suggest adjusting the deadzone. As far as I am aware, I do not have the option to adjust the deadzone with this configuration, so I don't really know what I am supposed to do. To be clear, my C-stick seems to work very unreliably on either the right or left sides and does not work entirely if I fling it vertically up or down.

I have the latest version of Dolphin and I have read the "Wii U Gamecube Adapter" Dolphin page.
↧

twilight princess graphic glitch(?)

December 14, 2018, 8:50 pm
$
0
0

.jpg   1.jpg (Size: 198.51 KB / Downloads: 2)

.jpg   2.jpg (Size: 223.31 KB / Downloads: 2)
You can see what's the problem. (Seems like every water has this same problem.) Anyone know how to fix?
↧

When will Dolphin Emulator Final Version be released?

December 15, 2018, 10:18 am
$
0
0
Is there a prediction on when the dolphin emulator will ever be maxed out?

5 years or less? or will it never end?

Also whens the next stable emulator release gonna be?
↧
↧

Wii Network Guide Help

December 15, 2018, 11:57 am
↧

Texture pack

December 15, 2018, 12:53 pm
$
0
0
How do you use texture on dolphin for android. I tried to download melee HD (texture pack) and uncompressed it. Than I pasted all those files to Load/Texture. What do I do next?
↧

Cheats erase save data

December 15, 2018, 12:59 pm
$
0
0
Attempting to add cheat to Animal Crossing (AR) and whenever I submit the cheats I want to use, next time I load the game my save data is gone.
↧
Search

Does ga-h81m-s2pv support dolphin

December 15, 2018, 1:58 pm
$
0
0
Hi
Does this setting is good enough
For wii and game cube emulator

Mother board ga-h81m-s2pv
8gb hyperx
I5 intel
Ubuntu 18.04.1 LTS
Install using this page of retropi to install
https://retropie.org.uk/docs/Debian/

Thanks
↧
↧

"game tried to reload a title that is not available in your NAND dump"

December 15, 2018, 4:19 pm
$
0
0
Hello!

So I've been getting this message: "game tried to reload a title that is not available in your NAND dump" whenever I try to launch the European version of The Last Story on Dolphin (Ishiiruka).

What I find weird is that it was launching normally earlier...

I have 2 versions of The Last Story on Dolphin, the normal European Version with English dubs (SLSP01) and the undubbed version (KLSEXJ) I played a bit using the undubbed version and the game ran normally, but since the undubbed version is weird, voice acted lines end before it should, bad lip syncing, etc.. I wanted to restart the game using the european version, however, it now gives me the message I posted above whenever I try to launch it..

Here is the full message: IOCTL_ES_LAUNCH: Game tried to reload a title that is not available in your NAND dump TitleID 0000000100000002. Dolphin will likely hang now.

I also get this on the top left when I launch the game:

Note: Option "SafeTextureCacheColorSamples" is overidden by game ini.
Note: Option "LastStoryEFBToRam" is overriden by game ini.
Warning: Opening the graphics configuration will reset settings and might cause issues!
Video config changed, reloading shaders.

I also use the HD Texture pack if that matters, but as I said, the game was running fine a couple hours before..

Oh and finally, I get this screen that I've never seen before whenever I launch the European version of The Last Story: https://i.imgur.com/hWpNRhm.png



Anyone know what could be causing this? Thanks a bunch!
↧

"game tried to reload a title that is not available in your NAND dump"

December 15, 2018, 4:42 pm
$
0
0
EDIT: Sorry, I posted the exact same thread before but I forgot to mention that I also have the exact same issue using Dolphin 5.0, so it most likely isn't an issue with Ishiiruka, but something more general. I just usually use Ishiiruka because of the "Compile shaders on startup" option.


Hello!

So I've been getting this message: "game tried to reload a title that is not available in your NAND dump" whenever I try to launch the European version of The Last Story on Dolphin (Ishiiruka).

What I find weird is that it was launching normally earlier...

I have 2 versions of The Last Story on Dolphin, the normal European Version with English dubs (SLSP01) and the undubbed version (KLSEXJ) I played a bit using the undubbed version and the game ran normally, but since the undubbed version is weird, voice acted lines end before it should, bad lip syncing, etc.. I wanted to restart the game using the european version, however, it now gives me the message I posted above whenever I try to launch it..

Here is the full message: IOCTL_ES_LAUNCH: Game tried to reload a title that is not available in your NAND dump TitleID 0000000100000002. Dolphin will likely hang now.

I also get this on the top left when I launch the game:

Note: Option "SafeTextureCacheColorSamples" is overidden by game ini.
Note: Option "LastStoryEFBToRam" is overriden by game ini.
Warning: Opening the graphics configuration will reset settings and might cause issues!
Video config changed, reloading shaders.

I also use the HD Texture pack if that matters, but as I said, the game was running fine a couple hours before..

Oh and finally, I get this screen that I've never seen before whenever I launch the European version of The Last Story: https://i.imgur.com/hWpNRhm.png



Anyone know what could be causing this? Thanks a bunch!
↧

Yet another Dolphin Runs Slow On Gaming PC

December 15, 2018, 5:36 pm
$
0
0
GTX 1070, amd ryzen 4 1400 3.6ghz, 16gb ram, windows 10, Dolphin 5.0 (stable) x64;

My current settings:

[Image: 8e9d34f00fc6a53fd1ef7526408e177a.png]  [Image: f268b2f6205d01de8aee06e8d39923e0.png]
[Image: 5bfadc6e0c971ff04027876cfd6932b5.png] [Image: 4d174a33c752c4220071f5a8285120a7.png] 
[Image: dea805457d06f413dbe3c2ea6c429b90.png]

All the graphics options in the advanced tab are unchecked.

I'm testing this out on various games and so far only Gauntlet Dark Legacy and Animaniacs: The Great Edgar Hunt work without giving me much hassle.

In Baldur's Gate Dark Alliance the entire game runs very slowly with really laggy audio. Which confuses me when i've seen this same game run in the same emulator on an older machine on youtube running at 1440p 60fps.
↧

Wiimote connected but refusing to work?

December 15, 2018, 7:22 pm
$
0
0
I'm attempting to connect my Wii remote to my computer to use with Dolphin. When I sync it with the emulator in the 'Dolphin Wiimote Configuration', my computer notifies me that it's setting it up. After a few seconds it tells me that it's ready to go, but the remote itself usually only flashes for a little bit after that and stops completely, like it didn't connect. It doesn't work with any games and will not respond to button presses. I've tried this multiple times but the result is always the same, even though it says the remote is connected to my PC. Any help?
↧
↧

Running dolphin under ubuntu retro pi

December 15, 2018, 8:54 pm
$
0
0
Hi
I would like to use my ubuntu to run retropi and through it dolphin
My ubuntu computer is strong enough to run dolphin

I would like to use retropi because
More emulators in one gui
Gui is very friendly for tv

I got this answer saying
Do not use retropi it have un support bugs dolphin version

Is it true? Any help in how to use latest dolphin in the retropi

Thanks
↧

DolphinFX for Android??

December 15, 2018, 9:21 pm
$
0
0
Ok, first of all, I don't know too much about these kind of stuff, so if my question makes no sense don't bully me ??? lol.

Is there any way to add more post processing effects to Dolphin emulator for Android? I've heard that DolphinFX does that but for the PC version. I ask it because I wanna play Wind waker with a bloom effect, and the Bad_bloom effect sucks... I hope someone answer me Sad. I play with a Nvidia Shield TV btw.
↧
Search

will i be able to run metroid prime trilogy with my new pc?

December 16, 2018, 12:37 am
$
0
0
my current specs go as this:
8 gb ram
intel core i7-7500U @2.70 GHZ
AMD radeon r5 m430
1 terrabyte HDD
x64-based windows 10
its a laptop, btw

new pc will go as:
gigabyte auros gaming 7 x470
32 gb ram (corsair vengeance pro (2x 16)
gigabyte radeon rx vega 64
AMD ryzen 7 2700x (Noctua NH-D15 cooled)
1024 gb of space (2x gigabyte ud pro 512gb model)
corsair 1000w power supply (platinum certified)
↧

Dolphinbar

December 16, 2018, 3:04 am
$
0
0
I have a dolphin bar and a third party Wiimote.
The Wiimote works on my Wii U, it works in modes 1,2 and 3 on the dolphin bar,
but mode 4 isn't detected by dolphin.
However it works fine on the Wii U emulator (in mode 4)

When I used to use a direct bluetooth connection, dolphin would detect it.

Help
↧
↧

Wiimote not detected dolphinbar

December 16, 2018, 3:04 am
$
0
0
I have a dolphin bar and a third party Wii mote.
The Wii mote works on my Wii U, it works in modes 1,2 and 3 on the dolphin bar,
but mode 4 isn't detected by dolphin.
However it works fine on the Wii U emulator (in mode 4)

When I used to use a direct Bluetooth connection, dolphin would detect it.

Help

Edit: The controller now works for about 2 minutes and then dolphin no longer detects it. The controller itself stays on and so does the Dolphin Bar
↧

Shake virtual control?

December 16, 2018, 10:46 am
$
0
0
What shake in virtual control.new super mario need shake for fly.thanks
↧

Neglected PRs

December 16, 2018, 12:15 pm
$
0
0
↧
Viewing all 26094 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>