It seems there's an nvidia depth problem only present with the Vulkan backend. Check here for more info: https://bugs.dolphin-emu.org/issues/10175 .
↧
Any plans to fix the Nvidia depth issue that's present with Vulkan?
↧
F-zero and NFS underground, offset camera angle?
I own both original games on the gamecube and played them a lot, lately i been doing a lot of streaming, and its much easier to emulate then it is to get all these capture devices, on both F-zero GX and Need for Speed underground, booting them up everything seems normal. but as soon as i start a race, the cars are off to the right side of the screen instead of the center, i'm using the USA NTSC versions , and i have played with the settings.... i have no custom textures loaded or anything. is there a fix for this?
Thank you
![.png]( "PNG Image")
Untitled.png (Size: 314.21 KB / Downloads: 8)
Thank you
Untitled.png (Size: 314.21 KB / Downloads: 8)
↧
↧
Memory card in Memory Card Slot A is in use.
Trying to run game Crazy Taxi. The game runs fine, but when I start it up it gives me that message.
I have been looking over the forums regarding this issue, but cannot seem to figure it out. Most answers are specific to windows. Which show a setting in the GameCube tab, but Android doesn't have that tab.
I have tried:
deleting the dolphin.ini
deleting the memcardA.raw
deleting the memcard line from the dolphin.ini
I am using the Nvidia Shield TV 2017 with Dolphin 5.0-3391.
I have been looking over the forums regarding this issue, but cannot seem to figure it out. Most answers are specific to windows. Which show a setting in the GameCube tab, but Android doesn't have that tab.
I have tried:
deleting the dolphin.ini
deleting the memcardA.raw
deleting the memcard line from the dolphin.ini
I am using the Nvidia Shield TV 2017 with Dolphin 5.0-3391.
↧
Audio not working on any games
I have Dolphin 5.0, and I've been running it for months with no problems. The last time I played Dolphin has been 2 or 3 weeks and the sound was working just fine. I started it up today to enjoy some Chibi Robo and it had no sound. I hadn't tried this dump yet so I decided to try Melee, and it had no sound either. I have played this dump before on Dolphin 5.0 and know that the sound worked just fine on it. I tried most of my dumps and none had sound. I tried changing practically every sound setting on Dolphin to no avail, and it's not just my PC either, as I was listening to music a minute before with no problem and am listening to music right now with no problems. I haven't changed any hardware or hookups on my PC. I've tried restarting my PC with no results either. Any ideas?
Thanks
Thanks
↧
Windows 10 Creators slowdown everywhere
Hi guys, Im running Windows 10 creators and cant reach 60fps even on nsmb.
fps goes up and down and vps level goes up and down too. FPS goes down to 20 or 30 every few seconds and vps goes to 24% or something like this.
Hardware is capable of 60fps, I d been playing at 60fps for some years.
Im using vulkan render, IR 4x, xfb virtual
4770k gtx1070. Dont know what is happening.
Always running latest build.
Edit. I found that sometimes the game Works fine without slowdown and other times there is slowdown everywhere. Nvidia drivers not activating 3d mode correctly?
fps goes up and down and vps level goes up and down too. FPS goes down to 20 or 30 every few seconds and vps goes to 24% or something like this.
Hardware is capable of 60fps, I d been playing at 60fps for some years.
Im using vulkan render, IR 4x, xfb virtual
4770k gtx1070. Dont know what is happening.
Always running latest build.
Edit. I found that sometimes the game Works fine without slowdown and other times there is slowdown everywhere. Nvidia drivers not activating 3d mode correctly?
↧
↧
Can i write MEM2 area from cheat code?
Direct codes of ARcode and Gecko do not function in the MEM 2 area.
How to write to MEM 2 area with cheat code?
Is there a build of Dolphin that supports writing to the MEM 2 area?
Please help!!
How to write to MEM 2 area with cheat code?
Is there a build of Dolphin that supports writing to the MEM 2 area?
Please help!!
↧
Way to play Dolphin in VR on Samsung S8
Getting the Samsung s8 this friday, I know you can play dolphin VR on windows is there a way to play it in VR using gear VR?
↧
Dolphin emulator shuts down after a game works
My Dolphin emulator works perfectly until I close it. And to make it work I have to keep deleting a file calldd "Dolphin Emulator" that keeps popping up in "Documents" but it also deletes the saves. Anyone else got this problem?
↧
S8 europe version don't buy for dolphin
If you think of ordering the exynos version of the s8 don't. buy a snapdragon 821 phone or buy a snapdragon 835 phone later.
I tried it and it is as bad as the s7 edge. It doesn't run with the vulkan drivers, well it starts up and the sound is okay but the image is none.
If you use opengl drivers it is really slow. Slower then the demo's of the s7 edge on youtube. I am talking about sub 10 fps. slowing down emulation speed doesn't do it any good either.
If you are European and want dolphin on your phone DON'T buy the galaxy s8 series.
I am not against the phone so far despite this. Still figuring it out. I am going to run some graphics demo's on it to see how it fares to the s7 edge.
I will update you guys soon.
If you want a video or give me tips on setup your welcome to do ask so. I only play games i bought that is pikmin, resident evil remake, zelda windwaker and zelda twpr
I tried it and it is as bad as the s7 edge. It doesn't run with the vulkan drivers, well it starts up and the sound is okay but the image is none.
If you use opengl drivers it is really slow. Slower then the demo's of the s7 edge on youtube. I am talking about sub 10 fps. slowing down emulation speed doesn't do it any good either.
If you are European and want dolphin on your phone DON'T buy the galaxy s8 series.
I am not against the phone so far despite this. Still figuring it out. I am going to run some graphics demo's on it to see how it fares to the s7 edge.
I will update you guys soon.
If you want a video or give me tips on setup your welcome to do ask so. I only play games i bought that is pikmin, resident evil remake, zelda windwaker and zelda twpr
↧
↧
How can I get Dophin working on Nvidia Shield TV 2017
I cannot for the life of me get it to work. It keeps looking for the SD card but the 2017 doesn't have one.
It only has a USB port and I have a flash drive in it.
I can't really get anything to work with this Shield 2017.
Has anyone gotten Dolphin up and running? Wold you please tell me what to do?
This has really got me beat. Been trying for nearly 2 weeks now and it is frustrating as all.
It only has a USB port and I have a flash drive in it.
I can't really get anything to work with this Shield 2017.
Has anyone gotten Dolphin up and running? Wold you please tell me what to do?
This has really got me beat. Been trying for nearly 2 weeks now and it is frustrating as all.
↧
Mac pairing issues
Hey guys,
So i've gone through the multiple posts of all of the Mac issues with pairing a wiimote. Things i've noticed that differ from other posts about my situation:
There is no -TR on my wiimote's address. I don't know if i'm just being dumb and not noticing it, but from what I understand it is not a -TR.
I can get my computer to recognize it, and have twice (kind of) paired it to dolphin, with it vibrating after holding the sync button under the battery cover. But despite it vibrating and me getting extremely excited, the lights on the bottom of the wiimote all keep flashing. I don't really know what differed those times when pairing.
I unpair from my bluetooth menu, and have looked to delete the com.apple.bluetooth.plist, but I cannot find it anywhere in my library.
[edit] ALSO, Dolphin seems to crash after pressing refresh on the wiimote menu a couple of times.
Again, I don't know whether i'm just a complete newbie at this or something is going wrong, but I appreciate any help you guys can offer. All I want to do is play Fatal Frame!
Thanks so much
So i've gone through the multiple posts of all of the Mac issues with pairing a wiimote. Things i've noticed that differ from other posts about my situation:
There is no -TR on my wiimote's address. I don't know if i'm just being dumb and not noticing it, but from what I understand it is not a -TR.
I can get my computer to recognize it, and have twice (kind of) paired it to dolphin, with it vibrating after holding the sync button under the battery cover. But despite it vibrating and me getting extremely excited, the lights on the bottom of the wiimote all keep flashing. I don't really know what differed those times when pairing.
I unpair from my bluetooth menu, and have looked to delete the com.apple.bluetooth.plist, but I cannot find it anywhere in my library.
[edit] ALSO, Dolphin seems to crash after pressing refresh on the wiimote menu a couple of times.
Again, I don't know whether i'm just a complete newbie at this or something is going wrong, but I appreciate any help you guys can offer. All I want to do is play Fatal Frame!
Thanks so much
↧
My Rig is sufficient?
CPU: Core I5 4460 3.2Ghz
GPU: Geforce GTX 650 TI
MEM: 8GB DDR3
It's good for a majority of games? can i run Metroid Prime 3, F Zero GX, and Rogue Squadron 2,3?
GPU: Geforce GTX 650 TI
MEM: 8GB DDR3
It's good for a majority of games? can i run Metroid Prime 3, F Zero GX, and Rogue Squadron 2,3?
↧
Netplay desync issues
My friends and I are trying to play the game “Dokapon Kingdom” together using netplay. We manage to get everything working and start the game, but at random, the 1st emulated wii controller “Loses connection” and it desyncs everyone from the game. I’ve tried searching in past threads about this, but it doesn’t amount to much. Most of the past threads are a couple years old at this point, so I’m wondering if dolphin has advanced further into a direction to where we can fix this. Any information for this situation is helpful. Thanks!
↧
↧
Help with Building Dolphin 5.0 in Visual Studio
I'm currently trying to compile a DebugFast version of Dolphin in Visual Studio, but I am running into a handful of errors:
![[Image: x6P3KRr.png]]()
They all seem to be with the same project: the D3D12 video backend. I'm new to visual studio, but not to programming or compiling. What do you recommend that I do? Am I missing any dependencies, do you think? Since there are syntax errors, am I maybe using the wrong compiler?
![[Image: x6P3KRr.png]](http://i.imgur.com/x6P3KRr.png)
They all seem to be with the same project: the D3D12 video backend. I'm new to visual studio, but not to programming or compiling. What do you recommend that I do? Am I missing any dependencies, do you think? Since there are syntax errors, am I maybe using the wrong compiler?
↧
Problems with galaxy s7 exynos android 7.0
Hi I've tried playing zelda wind waker on latest version of dolphin and it doesn't seem to run, just gets past the nintendo logo screen then nothing, I've tried a few setting like enable dual core, any help to get it working would be great.
↧
Games/WADs Simply Won't Run after New Graphics Card / RO< Location Change?
Hello,
Before I start this post, here are some relevant things:
PC specs: https://pastebin.com/K3wuciED
GPU specs: http://gpuz.techpowerup.com/17/04/20/5yd.png
I am running 64-bit Dolphin 5.0-3404.
It has been a while since I have played Wii games through Dolphin.
Since the last time, my computer has undergone two relevant changes:
1. I got a new graphics card (Nvidia Quadro 600 through PCIE instead of Intel HD Graphics 2000 onboard)
2. The drive letter of my external hard disk containing the Wii roms changed.
I have several games that used to run flawlessly, namely Mario Kart Wii and Smash Bros. Brawl.
However, now, they won't run at all.
Dolphin will start just fine. I set it to start with administrator priviliges via the Compatibility tab in Properties.
However, when I try to run a game or WAD, I get this error first: SetupWiiMemory: Can't create setting.txt file
Then, after clicking OK, I get this error: Unable to resolve read address 80004000 PC 0
After clicking OK, I get the same error except the 8-digit hexadecimal number has 4 added to it. (e.g. 80004004, 80004008, 8000401c, etc.)
That continues for as many times as I feel like clicking OK.
I can't close Dolphin normally while it's stuck in that loop, so I kill it via Task Manager.
If I start Dolphin again, it asks if I want to report errors to the devs, and then asks me to set my ROM path.
This happens no matter how many times I attempt to start Dolphin.
I have checked the permissions on both the executable folder, the ROM folder and the folder called "Dolphin Emulator" in Documents.
They all have full control given to all users, administrators, and my username.
Please help!
Before I start this post, here are some relevant things:
PC specs: https://pastebin.com/K3wuciED
GPU specs: http://gpuz.techpowerup.com/17/04/20/5yd.png
I am running 64-bit Dolphin 5.0-3404.
It has been a while since I have played Wii games through Dolphin.
Since the last time, my computer has undergone two relevant changes:
1. I got a new graphics card (Nvidia Quadro 600 through PCIE instead of Intel HD Graphics 2000 onboard)
2. The drive letter of my external hard disk containing the Wii roms changed.
I have several games that used to run flawlessly, namely Mario Kart Wii and Smash Bros. Brawl.
However, now, they won't run at all.
Dolphin will start just fine. I set it to start with administrator priviliges via the Compatibility tab in Properties.
However, when I try to run a game or WAD, I get this error first: SetupWiiMemory: Can't create setting.txt file
Then, after clicking OK, I get this error: Unable to resolve read address 80004000 PC 0
After clicking OK, I get the same error except the 8-digit hexadecimal number has 4 added to it. (e.g. 80004004, 80004008, 8000401c, etc.)
That continues for as many times as I feel like clicking OK.
I can't close Dolphin normally while it's stuck in that loop, so I kill it via Task Manager.
If I start Dolphin again, it asks if I want to report errors to the devs, and then asks me to set my ROM path.
This happens no matter how many times I attempt to start Dolphin.
I have checked the permissions on both the executable folder, the ROM folder and the folder called "Dolphin Emulator" in Documents.
They all have full control given to all users, administrators, and my username.
Please help!
Thanks,
HewwoCraziness
↧
Dokapon Kingdom and Controller Connection (Netplay)
My friend and I have spent the last 2 hours trying to make Netplay work for this game. On single player, there are no problems and everything works great. However, on Netplay, I receive a "Lost connection with Wii Remote 1."
Whenever I try to assign controller ports, it asks me what Game Cube (GC) controller I want to assign, but this game doesn't work with GC controllers. How do I assign a Wii controller on Netplay?
Do I need a physical controller for Netplay, or can I use my keyboard?
Whenever I try to assign controller ports, it asks me what Game Cube (GC) controller I want to assign, but this game doesn't work with GC controllers. How do I assign a Wii controller on Netplay?
Do I need a physical controller for Netplay, or can I use my keyboard?
↧
↧
Final Fantasy: Crystal Chronicles Locked Up
I was playing Final Fantasy: Crystal Chronicles and I got to Year 2: Goblin Wall. I finished the dungeon boss and when the mail animal thing showed up, the game locked and popped up one of those [Abort, Retry, Ignore] dialogs which did nothing. ![Sad]( "Sad")
I was using build 5.0-3385 if that matters...
I was using build 5.0-3385 if that matters...
↧
Samsung Galaxy S8 performance issues.
Hello, after hearing and watching the s8 run dolphin emulator almost flawlessly, I couldn't wait to try it out.
Now I received my phone today but I am getting God awful results.
The same games as they are playing and lagging like crazy, any way to fix this?
Are there any particular settings they are using?
What's going on?
Now I received my phone today but I am getting God awful results.
The same games as they are playing and lagging like crazy, any way to fix this?
Are there any particular settings they are using?
What's going on?
↧
"Wrong version" error when loading save state from same engine, different DSP [5.0]
Started a new game (Baten Kaitos), saved state to go change audio settings, restarted the game and tried to load, and got the error:
I can understand the problem with loading using a different sound engine, but it still makes it sound like it's a version issue, despite me not even restarting Dolphin between save and load attempt.
Is it just a catch-all error for any save state load error? If so, it might be nice to silence it when there isn't a save error whatsoever.
Code:
State is incompatible with current DSP engine. Aborting load state.
Unable to load: Can't load state from other versions!
The savestate was created using Dolphin 5.0I can understand the problem with loading using a different sound engine, but it still makes it sound like it's a version issue, despite me not even restarting Dolphin between save and load attempt.
Is it just a catch-all error for any save state load error? If so, it might be nice to silence it when there isn't a save error whatsoever.
↧